![ashtech Z-Xtreme System Manual Download Page 72](http://html1.mh-extra.com/html/ashtech/z-xtreme/z-xtreme_system-manual_2982712072.webp)
62
Real-Time Kinematic Surveying
Connect System Components
Connect all components as listed below. Some of these connections may already be
made, especially if the backpack rover system is being used. Make sure the connec-
tors are seated properly.
• GPS antenna
↔
GPS receiver
• Handheld computer
↔
GPS receiver
• Radio antenna
↔
Radio (radio antenna connector on back of GPS
receiver if radio is internal)
• Radio
↔
GPS receiver (not required if radio is internal to GPS receiver)
• GPS receiver power
↔
GPS receiver (optional if internal battery is used
for GPS receiver)
Power-up Rover System
Power up by pressing the power button on the GPS receiver. Turn on the handheld
computer using the power button on the keyboard. Check that all components are
powered up. The GPS receiver and the radio have LED indicators to indicate that
power has been applied and the equipment is on.
Figure 4.13
Receiver Mounted on Pole
Summary of Contents for Z-Xtreme
