ashtech Z-Xtreme, System Manual

Page: 39 / 102

29
Connectivity
nects to the Z-Xtreme via a dedicated power cable, Figure 3.9.
The receiver power cable connects to the receiver via a 3-pin Fischer type connector
located on the back panel of the receiver. The correct connector is labeled ‘Power’.
The other end of the external power cable connects to the pouch holding the battery
(Figure 3.10).
Obviously connection of the battery to the receiver is required prior to powering up the
receiver. The external power source can be connected at any time without concern of
Figure 3.9 Z-Xtreme Power Cable and Pouch for External Power
Figure 3.10 Power Cable Connecting Z-Xtreme and External Battery