ashtech Reliance FS/2, Operation Manual

Page: 47 / 186

Field Operation 31
F
ie
ld
O
p
erat
ion
Session Setup
After starting FAMlog, you must set up a session. A session can last from minutes to
days, but is usually one continuous work period where data is collected non-stop.
1. Press F4 (SETP) to access the Session Setup screen (Figure 3.7).
2. Type in a session name such as “DAY001.” Session names follow the same
conventions as DOS file names, i.e., no spaces, maximum of 8 characters.
The FS/2 has a power-saving feature that automatically turns off the FS/2 if there is no key activity
for a certain period of time. If the FS/2 turns off at any time, press the red power key to turn the
power on and resume at the same screen.
Figure 3.7: Session Setup Screen