ashtech HDS800, Reference Manual

Page: 286 / 678

270
Set Command Library
Examples
Enabling RTCM 3 differential data on port I3:
$PASHS,BDS,RT3,I3,ON*42
Disabling RTCM 2.3 differential data on port I1:
$PASHS,BDS,RT2,I1,OFF*OF
Relevant Query
Command
$PASHQ,BDS
See Also
$PASHS,DST
$PASHS,RTC,TYP
$PASHS,ATD,TYP
BEEP: Beeper Setup
Function
This command enables or disables the internal beeper.
Command Format
Syntax
$PASHS,BEEP,s1[,d2][*cc]
Parameters
Example
Disabling the beeper:
I7 OFF OFF OFF OFF OFF
I8 OFF OFF OFF OFF OFF
I9 OFF OFF OFF OFF OFF
RT2 RT3 CMR CMP ATM
Parameter Description Range Default
s1 Enables (ON) or disables (OFF) the beeper. ON, OFF ON
d2
Timeout, in seconds:
• 0: No timeout. If an alarm is activated, the
beeper will sound indefinitely until the
alarm is acknowledged.
• >0: If an alarm is activated, the beeper
will sound only for a limited period of time
(it will go out automatically at the end of
the specified timeout).
0-99 30
*cc Optional checksum *00-*FF