ashtech HDS800, Reference Manual

Page: 187 / 678

171
Web Server Help Files Collection
Configuration Tab
Note that depending on the current selection on this page,
the button located underneath the three fields on the left
may be either grayed or with a different label (
Add
or
Modify
).
• Deleting a message definition can be done by simply
clicking on the corresponding “trash” sign in the
Clear
column on the far right. This deletes the table row.
• There is also a
Clear All
button under the table that allows
you to delete all message definitions from the table in one
click.
Recording
Use this page to control raw data recording in the receiver
outside of any programmed sessions.
The parameters are the following.
Parameter Designation $PASHS
Site Name
Enter a 4-character string identifying the site where
data recording will take place. The following char-
acters are not allowed in the site name: / * . \ ,
SIT
Storage
Tell the receiver where to store the recorded raw
data. On selecting a memory device (Internal
Memory or USB Device), you can read, under-
neath the field, the amount of free memory cur-
rently available on the selected device.
Selecting the USB device implies that you know
there is one currently connected to the receiver.
MEM
Recording and
Output Eleva-
tion Mask
Enter the elevation mask angle in degrees (0-90°).
The data from all the satellites located in the eleva-
tion mask, seen from the recording site, will not be
recorded.
ELM
Data Type
A read-only field listing the type of raw data mes-
sages currently set to be recorded by the receiver.
-