ashtech GG Surveyor, Reference Manual

Page: 119 / 256

Command/Response Formats 101
Com
m
and
s
$PASHR,PPS
The receiver response message to this query command is in the form:
$PASHR,PPS,f1,f2,c3,*cc
where Table 6.24 outlines the response:
PRJ: Set Session Logging Information
$PASHS,PRJ,c1,s2,s3,m4,s5
This command sets the information about current project, where Table 6.25 outlines
the parameters. The parameters entered with this command are saved into an S-file
after downloading.
Example: Set the session information
$PASHS,PRJ,A,004,121,0412,DWK,Test_CASE<Enter>
PRT: Port Setting
$PASHQ,PRT,c
This command displays the baud rate setting for the connected port, where c is the
optional output port.
Table 6.24: PPS Response Structure
Field Description
f1 Period in seconds
f2 Offset value
c3 R (rising) or F (falling) for the synchronization edge of the pulse
*cc is the checksum
Table 6.25: PRJ Structure, Current Project Information
Parameter Description
c1 session name, 1 character
s2 receiver serial number, up to 3 characters
s3 antenna number, up to 3 characters
m4 month of the session, up to 2 characters
s5 operator information, up to 3 characters
s6 user comment, up to 9 characters