background image

17

Operating Manual - NE Multi Channel Power Amplifier

LIMITED WARRANTY (USA ONLY)

(Other countries please contact your respective distributor or dealer.)
For units purchased in the USA

, warranty service for this unit shall be provided by ASHLY AUDIO, INC. in accordance with 

the following warranty statement.
ASHLY AUDIO, INC. warrants to the owner of this product that it will be free from defects in workmanship and materials for 

a period of FIVE years from the original-date-of-purchase. ASHLY AUDIO INC. will without charge, repair or replace at its 

discretion, any defective product or component parts upon prepaid delivery of the product to the ASHLY AUDIO, INC. factory 

service department, accompanied with a proof of original-date-of-purchase in the form of a valid sales receipt. This warranty 

gives you specific legal rights, and you may also have other rights, which vary from state to state.
EXCLUSIONS: This warranty does not apply in the event of misuse, neglect, or as a result of unauthorized alterations or repairs 

made to the product. This warranty is void if the serial number is altered, defaced, or removed. ASHLY AUDIO, INC. reserves 

the right to make changes in design, or make additions to, or improvements upon, this product without any obligation to install 

the same on products previously manufactured.
Any implied warranties, which may arise under the operation of state law, shall be effective only for FIVE years from the 

original-date-of-purchase of the product. ASHLY AUDIO, INC. shall be obligated to only correct defects in the product itself. 

ASHLY AUDIO, INC. is not liable for any damage or injury, which may result from, or be incidental to, or a consequence of, 

such defects. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion, or limitation of 

incidental or consequential damages, so the above limitations or exclusions may not apply to you.

OBTAINING WARRANTY SERVICE:
For warranty service in the United States, please follow this procedure:

1) Return the product to ASHLY AUDIO, INC. freight prepaid, with a written statement describing the defect and application 

that the product is used in. ASHLY AUDIO, INC. will examine the product and perform any necessary service, including re

-

placement of defective parts, at no further cost to you.
2) Ship your product to:
ASHLY AUDIO, INC. 
Attention: Service Department
847 Holt Road
Webster, NY 14580-9103

Summary of Contents for Protea NE4250





















Reviews: