
P750-665
Page 16 of 52
Prior to turning gas on and attempting to light the appliance, make sure the appliance is
outside, in a well ventilated area and free of any debris and is not in contact with or near any
people, animals, materials or structures. Failure to adhere to the above instruction may result
in property damage, serious bodily injury or death.
LIGHTING INSTRUCTIONS
To Light
1.
Read instructions before lighting.
2.
Control knob must be in the “OFF” position.
3.
Connect propane cylinder (See Manual), open cylindervalve.
4.
Push and turn control knob counter clockwise to “LOW”.
5.
Press the igniter button repeatedly to lightburner.
6.
Release control knob after 45 seconds.
7.
If ignition does not occur in 45 seconds, push and turn burner control knob to “OFF”, wait 5
minutes, fan with newspaper or magazine, and repeat lightingprocedure.
8.
If igniter does not light burner, use a long match or long butanelighter.
9.
After burner ignites, adjust flame to desired flame with the control knob.
To E nguish
1.
Turn and push the control knob clockwise to the OFFposition.
2.
Close cylinder valve, disconnect propane cylinder.
Summary of Contents for Signature Design APG-P750-9P
