6.
If your model has back wings, align the male the female brackets and slide the wing down into place, See
Figure C
7
. Connect the Power Transformer cable to the corresponding plug coming from the back of the chair
Figure A #5
8
. Connect the Power Cord into the Power Transformer
Figure A #6
9
. Connect the power cord into an electrical outlet near where the chair will be used
Figure A #7.
WARNING:
Clear area below chair before lowering to reduce risk of injury or death.
If the chair is not func�oning, check the plug in and connec�on of the cords first (The order is A-B-C), see the Figure A.
Be sure cords are clear from the chair prior to opera�on.
Figure C
Figure B
Page 4 Of 14
All Rights Reserved.
Snap
SIGNATURE DESIGN BY ASHLEY
TROUBLE SHOOTING
PROBLEM
C
hair will not operate
POSSIBLE FA
C
TORS
Transformer may not be connected
SOLUTIONS
Ensure both wire from the chair and the power cord is
fir
mly conne
cted
to the transformer
May. 2022
00090F
