Installat ion Guide
—04—
5
Flip the foot end of the bed from the box
and lay it on top of the head end.
HEAD BOARD
6
Install the remaining 2 legs on the foot
end of the bed, make sure the legs are
tight. Uncoil the DC power cord
(connected to the control box)
and put it to the side of the bed.
Connect The Motion Sensor Connectors.
7
(
M9X9
)
Motion sensor installation
Motion
Sensor
Mounting
Bracket
=
+
Prepare The Motion Sensor Hardware.
STEP 1:
Connect the motion sensor
to the mounting bracket.
STEP 2:
Rotate the mounting
bracket 90 degrees clockwise
STEP 3:
DONE !
STEP 2
:
Connected the motion sensor connectors as illustrated.
Note there are two connectors, one on each side of the bed.
STEP 1:
Clip the mounting bracket onto the center adjustable legs
as illustrated.
HEAD BOARD
HEAD BOARD
DC Power Cord
Control Box
Customer Service Toll Free: 1-800-248-5988
Summary of Contents for M9X832
Page 2: ......
