7
7. To prevent moisture from entering the wire
compartment, apply a small amount of silicone
sealer (not included) to the threaded side of the
mounting balls and then install them onto the
mounting screws. Wipe off excess caulk. (Fig.
6)
8. Make sure exterior wall surface and fixture
backplate are free of dirt before applying caulk.
Using exterior grade caulk, start on one side of
fixture backplate and follow contour, where the
fixture backplate meets the exterior wall surface
upward. Proceed to caulk over top of backplate
and down other side.
Do not caulk bottom of fixture backplate to
ensure proper moisture drainage. (Fig. 7)
Exterior Grade Caulk
Outdoor Fixture
Backplate
Exterior
Wall Surface
ASSEMBLY INSTRUCTIONS
6
7
Exterior Grade Caulk
Mounting Ball
