5
GG
Hardware Used
CC
x 2
Mounting
Screw
Hardware Used
GG
x 4
Lock
Screw
DD
Outlet Box
Screw
EE
x 2
x 2
Hex Nut
4.
3
a. Screw the Mounting Screws (CC) into the
Crossbar (A), place the Mounting Screws
(CC) and thread the Hex Nuts (EE) onto the
Mounting Screws (CC) as shown. Secure
the position of the Mounting Screws (CC) by
tightening the Hex Nuts (DD) against the
Crossbar (A).
b. Secure the Crossbar (A) to the Outlet Box
with Outlet Box Screws (DD). (Fig. 3)
Outlet Box
2
3. Place the fixture hood onto the top edge of the
cage (D). Line up holes on the top edge of the
cage (D) and mounting holes in the bottom of
the fixture hood. Using screwdriver, thread lock
screws (GG) into the mounting holes in the
bottom of the fixture hood. Hand-tighten until
snug.(Fig. 2)
D
ASSEMBLY INSTRUCTIONS
Mounting
Hole
Fixture
Hood
Hole
EE
DD
CC
A
