2. HANDPIECE SELECTOR
(Fig. 6) - The
Aseptico ADU-22 includes a handpiece
selector toggle on the front of the console
which selects either highspeed (HP1) or
lowspeed (HP2) handpiece operation.
Connect the proper highspeed and
lowspeed handpieces to their appropriate
connector. Switch the handpiece selector
to the desired handpiece. Depress foot
control to activate handpiece.
The amount of air pressure supplied to
each handpiece may be adjusted by
turning the drive air-pressure control
screws underneath the console (See
page 7).
3. FOOT CONTROL
(Fig. 7) - The foot
control applies air pressure to the selected
handpiece
Position the foot control on the floor. For
handpiece operation, apply foot pressure
to any part of the center disk.
4
OPERATION FUNCTIONS:
1. THREE-WAY AIR/WATER SYRINGE
-
Depress the right button for air operation,
and the left button for water operation.
Depressing both buttons will create a mist.
The syringe features quick-change
autoclavable tips: To remove a tip, press
on the locking collar surrounding the tip
socket and pull the used tip straight out of
the socket (see Fig.5). To insert a new tip,
press locking collar and push tip into
socket as far as it will go. Release collar
and gently tug on tip before using to
ensure that tip is securely locked into
socket.
Syringe Tip Sterilization:
1)
Remove contaminated syringe tip.
2)
Remove all visible signs of contamination
before autoclaving.
3)
Autoclave tip at 132° C (270° F) for ten
minutes.
4)
Sterilize between each patient use.
NOTE
: Since only the tips can be
autoclaved, it is recommended that the
air/water syringe be bagged with a
disposable, single-use plastic sleeve
between each patient use.
APPLY
PRESSURE TO
ACTIVATE
HANDPIECE
Figure 7 - Foot Control
Figure 6
LOWSPEED
CONTROL
HIGHSPEED
CONTROL
3-WAY
AIR/WATER
SYRINGE
HANDPIECE
SELECTOR
Figure 5
DEPRESS
LOCKING COLLAR