3
4
. Remove the AA-21 high volume vacuum
(HVE) system and High-Density
Polyethylene (HDPE) water supply tank from
packing and install on proper quick
disconnects on the console (Fig. 1)
5a.
To install the HVE vacuum bottle, press on
locking-ring tab (Fig. 3a), push bottle into
quick coupler, and release tab.
5b.
Hang the
vacuum head in
the holder at the
right-hand side
of the chassis
(Fig. 3b).
6.
To install water supply bottle, thread it into
the white plastic fitting at the left rear
corner of the chassis (Fig. 4).
QUICK
DISCONNECT
VACUUM BOTTLE
LOCKING
RING TAB
Figure 3a
Figure 3b
Figure 4