Asentria SiteBoss 571, User Manual

Page: 65 / 128

Asentria SiteBoss 571 UserManual
Page 65
SiteBoss 571 - Class Table
A) Class 1 [Info]
B) Class 2 [Minor]
C) Class 3 [Major]
D) Class 4 [Critical]
E) Class 5 []
...
L) Class 12 []
Class
n
These fields set the event severity levels that are assignable to events detected by the SiteBoss (maximum length
47 chars). Info, Minor, Major, and Critical are the default class names assigned to the first four classes. These
can be changed and others added as desired to meet your specific needs.
The class number and name are reported in Asentria Alarms, and SNMP traps. It is a mechanism for you to
provide varying severities for different alarms so that you can act on them upon receipt.
Data Alarm/Filter Settings
This is the menus for configuring serial data event monitors. A Date Event is a group of settings configured to
generate an alarm when specified characters or alpha/numeric strings are received by the SiteBoss. For more
information on Data Alarms see the
Configuring and Using Data Events and Alarm Equations Feature Guide on
the Asentria Product Information Portal or contact Asentria Technical Support .
SiteBoss 571 - Data Alarm/Filter Settings
A) Data Alarm Field Settings
B) Data Alarm Macro Settings
C) Data Alarm Settings
D) Display Alarm Status
E) Exit Upon True Data Alarm [OFF]
Data Alarm Field Settings
Selecting this option displays the menu for configuring up to 16 data alarm fields.
Data Alarm Macro Settings
This option displays the menu for configuring up to 100 macros to be used for data alarming.
Data Alarm Settings
This selection displays the menu for configuring up to 1000 data alarms or filters.
Display Alarm Status
This menu option displays real time information on data event monitors you've configured.
Exit Upon True Data Alarm
This is an ON/OFF toggle to set whether the S571 will stop processing more data event evaluations on a single
record after it has found one match. This should be disabled if it is possible to have more than one event in a
record. This is a global setting
– it applies to ALL configured data alarms. The default setting is OFF.
Data Alarm Field Settings
This menu is used to set up to 16 data alarm fields.