Start-up
We recommend starting up operation with clean chlorinated water.
ASIN Aqua SALT
only begins to produce a sufficient amount of chlorine several hours after first start-up.
Since it is necessary to use a much larger quantity of chlorine for first chlorination than during regular
operation, it may happen that
ASIN Aqua SALT
would not attain the required level. That is why we
recommend chlorinating the water in the pool by pouring in approx. 30 ml chlorine disinfectant per each
m
3
of water or 50 g of SUPERCHLOR per every 10 m
3
.
Example:
If the capacity of your pool is 33,6 m
3
, pour 30 x 33,6 = 1008 ml, i. e. approx. 1 liter of chlorine
disinfectant into the pool.
Put 4 – 8 kg of salt per every 1 m
3
of water into the pool.
Example:
The dimensions of the pool are 4 m x 7 m and water depth is 1,2 m. Its capacity is than 4 x 7 x
1,2 = 33,6 m
3
. The amount of salt to be put in is 33,6 x 8 = 268,8 kg.
Before plugging the ASIN Salt SALT into the power supply, you must let the salt dissolve completely
(approx. 24 hours) and check the pH level.
If it is less than 7,3 (the optimum value is 7,5), treatment
with a pH+ agent is necessary.
Unsuitable pH values reduce the life of electrodes.
9
Maintain 7,5
