asecos BATTERY CHARGE, User Manual

Page: 4 / 13

6 7 GENERAL NOTES GENERAL NOTES
2. TRANSPORT
ATTENTION:
Transport the cabinet in an upright position on a pallet truck, tied and secured against slipping, until the final
place of installation is reached. The transport locks in the door joints may only be removed directly at the
place of installation! Inappropriate transport can lead to concealed damage to the fire protection insulation!
We can only guarantee the necessary quality if the cabinet is transported to the place of its use by our
specially trained staff.
ATTENTION:
The doors must be locked prior to transport! The extraction unit is inside the cabinet and is only mounted
after the in-plant transport to the place of use.
2.1. TILTING THE CABINET
ATTENTION:
Tilting the cabinet may only be done without jolts!
2.2. DISMANTLING OF THE TRANSPORT PACKAGING
1
= 4×
2
= 8×
3
4 5 6
ATTENTION
Cabinet width 600 mm
The clearance drive-in width of the base is 520 mm
You must observe this when selecting a pallet truck! Appliances with a carrying width larger
than the drivein width may not be used
2.3. IN-PLANT TRANSPORT
• is also possible without transport locks (inserted as standard in the door joints)
ATTENTION:
The doors must be locked prior to transport! The extraction unit must be removied from the
top of the cabinet
1 2
=
4×
3
2.4. Q-MOVER
• Order no. HF.I.23526, available from your authorised dealer
a: upright transport
b: upright transport through standard doors
(clearance height 1986 ± 2 mm)
1 2
=
4×
3
4 5
ATTENTION:
Damage to the cabinet must be reported in writing without delay!
2.5. TITLING ONTO THE SIDE WALL
• is only possible with the optionally available tilting bracket (order no. HF.V.27665)
1 2 3