Ascon Tecnologic - KM1E/KR1E - Wine - ENGINEERING MANUAL -
PAG. 1
K
@
1E
WINE CONTROLLER
Engineering Manual
Code : ISTR_M_KM1E-KR1E_E_01_--
Ascon Tecnologic S.r.l.
Viale Indipendenza 56, 27029 Vigevano (PV) - ITALY
Tel.:
+39 0381 69871/
FAX:
+39 0381 698730
www.ascontecnologic.com
e-mail:
1 MOUNTING REQUIREMENTS
This instrument is intended for permanent installation, for
indoor use only, in an electrical panel which encloses the
rear housing, exposed terminals and wiring on the back.
Select a mounting location having the following characteristics:
1.
It should be easily accessible;
2.
There is minimum vibrations and no impact;
3.
There are no corrosive gases;
4.
There are no water or other fluids (i.e. condensation);
5.
The ambient temperature is in accordance with the
operative temperature (0... 50°C);
6.
The relative humidity is in accordance with the instrument
specifications (20... 85%);
The instrument can be mounted on panel with a maximum
thickness of 15 mm.
When the maximum front protection (IP65) is desired, the
optional gasket must be mounted.
2 OUTLINE DIMENSIONS (mm)
2.1 KM1E
2.1.1 Dimensions
PV
AT
48
14
11
48
48
2.1.2 Panel cutout
45
+0.6
65 mm min.
65 mm min.
45
+0.6
2.2 KR1E
2.2.1 Dimensions
64
6
28
14.5
33.
5
78
35
AT
PV
2.2.2 Panel cutout
86 mm min.
29
+0.
6
41 mm min.
71
+0.6
mm
