08 October 2018 / Ver. D
7
TD 93272EN
Installation Guide
Application Server
3
Description
Figure 1. Front and Rear view.
Legend:
1) Ethernet port to connect to the LAN
2) Mini USB management port
3) Status LED
4) Reset or Mode Button (through a pin hole)
5) Power Supply connection
6) Fuse
Figure 2. Detail of the connections on the front
The Application Suite front side has a status indicator and is used for maintenance. The
LED indicates the status of the module and the management port (see #2, in
) is
for direct connection to the module.
The rear side is used for connecting supply voltage.
3.1
LED status indications
The LED shows that the Application Suite is working.
Flashing patterns:
for future use.
3.2
Operating Modes
Besides normal operation the Application Suite can operate in another modes, i.e. Boot
Mode. At present, the Boot Mode is for development purposes only.
3.2.1 Normal Operation
All configuration and settings for the application, maintenance such as backups, software
upgrade and troubleshooting, are performed in the application GUI and is described in the
Blue
Normal indication
