TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
14
This template can be used as a backup if you want to restore the configuration of the
VoWiFi Handset at a later stage or as a template that can be applied to a number of VoWiFi
Handsets.
1
Open PDM or the Device Manager in the IMS3.
2
In the
Numbers
tab, select the VoWiFi Handset you want to save as a template.
3
Make a right-click and select “Use as a template...“. Enter a descriptive name for the
template.
4
The
Edit template
window is opened. By default, all parameters are selected and are
saved when clicking “OK“.
If one or more parameters should be excluded, remove them by clearing the checkbox
next to the parameter.
Some parameters are user specific. If it is decided to apply this type of template to
several VoWiFi Handsets, it is recommended to exclude the following parameters:
•
User display text - A text string displayed in idle mode. The parameter is located
directly under “Settings“.
•
Phone lock PIN code - The security code used to unlock the keypad. The parameter
is located under Settings > Locks.
•
Endpoint ID - The identity/name of the user registered in the PBX. The parameter
is located under VoIP > General.
5
Click “OK“.
4.4.5
Synchronizing a Handset with PDM
After installing and saving a VoWiFi Handset, it will be synchronized each time it is
connected to the PDM. The synchronization transfers parameter changes between the
VoWiFi Handset and the PDM and vice versa as follows:
•
If a parameter has been changed in the VoWiFi Handset, it will be transferred to the
PDM/IMS3.
•
If a parameter has been changed in the PDM/IMS3 while the VoWiFi Handset was
disconnected, it will be transferred to the VoWiFi Handset.
If the same parameter has been changed in both the PDM/IMS3 and the VoWiFi Handset,
the value in PDM/IMS3 will be transferred to the VoWiFi Handset.
4.4.6
Configure Handset without Saving It in PDM
It is possible to configure a VoWiFi Handset without saving it in the PDM. An unsaved VoWiFi
Handset do not have the symbol
in the Saved column. The settings in the VoWiFi Handset
can be synchronized and saved in the PDM later on. However, it is recommended to save the
VoWiFi Handset in PDM if backup is needed. For example when a VoWiFi Handset needs to
be replaced.
1
Put the VoWiFi Handset in the DP1 cradle.
2
Open PDM.
3
In the
Numbers
tab, select the unsaved VoWiFi Handset you want to configure.
4
Select Number > Edit parameters.
5
The
Edit parameters
window is opened. Edit the parameters of the VoWiFi Handset
and click “OK“.
6
Remove the VoWiFi Handset from the DP1 cradle. The VoWiFi Handset is no longer
visible in the PDM and the settings are only saved in the VoWiFi Handset.
