ASCOM EURIT 133, User Manual

Page: 42 / 64

36
20313553en_ba_a0
Range warning
If you activate the range warning, a
warning signal will sound if you leave the
radio range in the course of a call in the
communication state. This could be due,
for instance, to building-related factors at
the limit of your base station’s transmission
and reception range.
If this happens, move back towards the
base station or out of the radio shadow/
blind spot (Bitte Wahl vornehmen wie bei
Avena) until this warning signal stops. If
you do not return to within the base
station’s transmitting range, the radio and
telephone link will be disconnected.
Note:
If the range is insufficient, shifting the base
station can bring about an improvement.
See the section "Setting up the telephone
and putting it into service" for information
about the optimum location.
Activating/deactivating
the charge check tone
When the handset is replaced correctly on
the charging bracket/in the cradle an
audible check tone is heard.
Offhook answering
The offhook answering facility enables you
to take incoming calls directly, simply by
lifting the handset from the base station
(without having to press the Connect key).
Note:
If the handset is not in the base station,
you can answer the calls in the normal way
by pressing the Connect key.
Handset settings
Lighting
If you do not require the display lighting
function you can switch it off.
Autom. DTMF
Activate "Autom. DTMF" to automatically
switch to DTMF dialling during an active
connection e.g. with the answering
machine.
Entering the user name
If you have programmed various multiple
subscriber numbers in "BaseStat. setting"
you can specify a name for each MSN
number in your handset. The name is used
to indicate which user is selected and for
whom an incoming call is intended.
Note:
If no user is programmed, the main menu
"Change user" is not displayed.
Handset settings
Username
User A
User B
. . .