PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
3
2.1
The 9d24 Mkll Cordless Telephone
Case
The case is made of durable PC/ABS plastic and is water, dust and soil protected. The joint
between the front and rear parts of the handset casing has a gasket made of elastic plastic
(thermoplastic polyester elastomer, TPE), as does the battery. Even the headset connector
has a tightening TPE gasket, preventing dust and water from getting inside also when the
headset is not connected.
The 9d24 Mkll handset has the enclosure protection IP64 and it also fulfils IEC 68-2-32
procedure 1, which makes it drop proof from one meter onto concrete.
Antenna
The antennas are integrated inside the handset.
Display
The display is a illuminated 128 x 64 pixels LCD, covered by anti-reflex treated plastic glass
for maximum readability.
Keypad
The keypad is illuminated, which makes it possible to operate the handset in dark
environments. While not in use the keypad should be locked to prevent pressing a key
accidentally.
Clip, Hinge-type
The clip on the back of the handset helps you fasten the handset to a belt or similar.
It is also possible to change the clip to a swivel-type or if no clip is needed, to replace it
with a covering plate.
Battery
The battery is a rechargeable Li-Ion battery placed on the back of the handset.
SIM Card
The SIM card contains all personal settings such as phonebook, identity, alert signal and
your defined functions of the Soft keys and Hot keys. This means that all personal settings
will be retained if the SIM card is moved to another handset.
2.2
Chargers
2.3
Desktop Charger for 9d24 Mkll
The Desktop Charger is used for charging your handset, for example at your desk. The
tilted design facilitates the use of handsfree operation, e.g. in loudspeaking mode. The
charger is delivered with a plug-in power supply and is connected into a wall socket.
