PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
34
Set the Clock to be Visible/Invisible in Stand-by Mode
Select the Settings tab and press the Navigation key (down) to enter Settings. Step to
“General” and press Navigation key (right). Use Navigation key (down) and mark “Clock”.
Press “Change”. The Clock checkbox is marked/unmarked.
6.5.15 Turn On/Off Automatic Keypad Lock
Select the Settings tab and press the Navigation key (down) to enter Settings. Mark
“General” and press Navigation key (right). Mark “Auto key lock” and press “Change”.
The Auto key lock checkbox is marked/unmarked. In stand-by mode a locked keypad is
indicated by the “Locked keypad” icon.
6.5.16 Enable/Disable Quick Answer
Select the Settings tab and press the Navigation key (down) to enter Settings. Step to
“General” and press Navigation key (right). Use Navigation key (down) and mark “Quick
answer”. Press “Change”. The Quick answer check box is marked/unmarked.
6.5.17 Set New Messages to be Displayed Upside down
Select the Settings tab and press the Navigation key (down) to enter Settings. Step to
“General” and press Navigation key (right). Use Navigation key (down), step to “New
message rotated” and press “Change”. The New message rotated checkbox is marked/
unmarked.
When this parameter is set, the call information for incoming calls is also displayed upside
down.
6.5.18 Set Owner ID
Select the Settings tab and press the Navigation key (down) to enter Settings. Step to
“General” and press Navigation key (right). Step to “Owner ID” with Navigation key
(down) and press “Edit”. Enter a name and press “Save”. Change between upper and
lower case by pressing the *-key on the keypad. The new ID is shown. The handset will
automatically return to the list of general settings.
6.5.19 Select PBX System
Select the Settings tab and press the Navigation key (down) to enter Settings. Step to
“System” and press Navigation key (right). Mark “Select system” and press Navigation key
(right). Use Navigation key (up/down), mark system and press “Select”. “System selected”
is shown. The handset will automatically return to the system menu.
Select PBX System Set as a Hot key
If you are often moving between systems, it might be convenient to change system
quickly, therefore you can set this function as a Soft key, or Hot key.
To change systems: just press the pre-programmed Soft/Hot key to connect to the next
available PBX system (A, B, C or D).
6.6
Additional Information
To obtain general information about the handset select the Settings tab in the menu. Press
navigation key (down), step to “System” and press Navigation key (right). Use navigation
