Operating Instructions for Ascoline 700, AEB 2xx, 4xx
ascobloc
Gastro-Gerätebau GmbH
01156 Dresden, Grüner Weg 29
Germany
Tel. +49 351 4533-0
Fax: +49 351 4537-339
E-mail:
AEBxxxff.doc Status: 06 April 2011
Subject to change without notice!
5
In addition to that they require, apart from specified inspections, no maintenance or servicing.
6.2
Measures to be taken for longer stoppages
Clean the appliance thoroughly. Disconnect the appliance from the mains
7 Faults and their Rectification
7.1
Fault rectification
Always disconnect the power plug before starting any repair work!
Fault
Cause
Remedy
Green indicator light is on,
but there is no heat
Heating, power controller or
temperature limiter defective,
a phase is missing
Replace defective component
No heat generated at the
electric frying, grill or
griddle plate
Power connection to equipment
interrupted
Fuse in customer supply is open
Green indicator light is on,
but there is no heat
Heating element faulty
Restore supply
Restore supply
Replace heating element
Contact breaker trips
repeatedly
Wrong contact breaker or short-
circuit
Replace
Green indicator light does
not light up when the
appliance is switched on
Mains connection or contact breaker
defective
Indicator light is faulty
Replace contact breaker
A repair may only be performed by trained, qualified specialists. Please give us the equipment number
and the type designation that are on the equipment name plate. The plate is located on the front cover
A of the equipment (see connection diagram).
7.2
Customer service
ascobloc Customer Service:
Tel.
+49 351 4533–384
Fax
+49 351 4533–379
