•
paddle shifter snap action force is set by the combination of magnets and spacers
•
do not let magnets smash into each other – magnets are very brittle and can break
•
to pull out installed magnets, put additional magnets carefully on top
•
press the paddle shifter to separate installed magnets
•
pull out top and bottom magnet
•
magnets can be separated the best by shearing them off
•
4 pcs 3mm
magnets & spacers
can be found in the
packaging foam insert
•
approx. actuation force depending on magnet height and spacers:
1. 800g = 5mm + 5mm (factory default)
2. 570g = 5mm + 5mm + 1 spacer
3. 480g = 3mm + 3mm
4. 440g = 5mm + 5mm + 2 spacers
5. 340g = 3mm + 3mm + 1 spacer
6. 260g = 3mm + 3mm + 2 spacers
7. paddle shifter force setting
9
