![background image](http://html.mh-extra.com/html/ascendor/plg7/plg7_assembly-instruction-manual_2980818009.webp)
Assembly Instruction PLG7
Version 2.00
Page 9
The next step is to adjust the angle of the travel rails
in accordance with the information given in the
installation drawing (e.g. 32,7°).
The easiest way to do this is to adjust the rails with
the aid of a one-hand bar clamp or a stanchion to
match the dimension H (edge of the step until
middle
of the lower rack).
Please note that the dimension H is only a standard clearance and
small deviations may occur, but it should not be underrun,
otherwise there is a risk of collision with the steps.
It’s therefore essential that the angle of the travel rails
corresponds with the information on the drawing!
It’s important to ensure that the mounting brackets between
handrail and rack are mounted in a
vertical
position!