ASCEL Electronic AE20125, Assembly And Operation Manual

Page: 38 / 52

6.2 STARTUP WFORM
The start-up waveform. The selection matches the selection of
the output waveform.
6.3 CAL. OFFSET
The accuracy of the AE20125 function generators output
frequency is 50ppm (parts per million = 0.0001%). With a
sufficiently accurate frequency counter it can be further
improved, by entering a calibration offset.
Note: The calibration should be carried out after the unit has
reached operating temperature (> 30 min).
7 Firmware Update
To update the firmware, hold
MENU/Back
while switching the
generator on.
"FIRMWARE UPDATE"
is shown. Connect the
generator to a PC via USB and use the Ascel Firmware Update
Utility to update the Firmware.
8 Reset
To reset the device to factory defaults, press and hold
FUNCTION/Enter
and turn the unit on. Release the key when
LOADING DEFAULTS
is displayed.
The following settings will be restored: see next page
31