4. The two highlighted brackets on the front side of the
top case part should be broken off as they will interfere
with the heat sink and C11.
5. Solder four pieces of wire, about 15cm (6") long, to the
two Cinch connectors and their ground leads.
6. Put the connector's wires through the appropriate holes
in the back plate.
7. Attach the ground leads and solder the wires to the
PCB.
8. Fasten the case with the included screws.
This completes the case mounting.
22
Summary of Contents for AE20125
