Asante IC40240-10G User Manual Download Page 298

Page: 298 / 792

Displaying the DNS Cache

You can display entries in the DNS cache that have been learned via the designated
name servers.

Field Attributes

•

– The entry number for each resource record.

•

Flag

– The flag is always “4” indicating a cache entry and therefore unreliable.

•

Type

– This field includes CNAME which specifies the canonical or primary name

for the owner, and ALIAS which specifies multiple domain names which are
mapped to the same IP address as an existing entry.

•

Type

– This field includes ADDRESS which specifies the host address for the

owner, and CNAME which specifies an alias.

•

– The IP address associated with this record.

•

TTL

– The time to live reported by the name server.

•

Domain

– The domain name associated with this record.

Web

–

Select DNS, Cache.

Figure 16-3 DNS Cache

CLI -

This example displays all the resource records learned from the designated

name servers.

Console#show dns cache

38-7

NO FLAG

0 4

1 4

2 4

3 4

4 4

Console#

TYPE DOMAIN

TTL IP

Address www.times.com

198

199.239.136.200

Address a1116.x.akamai.net

61.213.189.120

Address a1116.x.akamai.net

61.213.189.104

CNAME graphics8.nytimes.com

POINTER

TO:2

CNAME graphics478.nytimes.com.edgesui

POINTER

TO:2

16-5

Displaying the DNS Cache

Summary of Contents for IC40240-10G

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IC40240-10G

Reviews:

Brands by name

Popular brands

Asante IC40240-10G, User Manual

Search results

Summary of Contents for IC40240-10G

Reviews:

Brands by name

Popular brands