manualshive.com logo in svg

Asante FriendlyNET GX5-424W, User Manual

Share
Download
Asante FriendlyNET GX5-424W User Manual Download Page 21

Asanté

 FriendlyNET GX5-424W 

User’s Manual 

21

 

The only selection available for the trunk setting is 

port 25 and port 26

. To close this function, 

select 

disable

. 

 

The selected trunk setting port must connect to the device with the same VLAN group. 

Mirror Settings 

Port Mirroring is a way to send network traffic to a port that wouldn’t ordinarily receive it, so that a 
network manager can troubleshoot the network by analyzing the traffic. 

Configure Port Mirroring by selecting a port to be monitored and a sniffer port to which that traffic 
will be sent. 

Choose from one of these three modes: 

•

 

TX (Transmit) Mode:

 all traffic transmitted by the source port will also be sent to the sniffer 

port 

•

 

RX (Receive) Mode:

 all traffic received by the source port will also be sent to the sniffer port 

•

 

Both (Transmit and Receive) Mode:

 all traffic either transmitted or received by the source 

port will also be sent to the sniffer port 

Summary of Contents for FriendlyNET GX5-424W



































Reviews:

No comments

Brands by name

Popular brands

Load more brands