Asante FriendlyNET FBT100, User Manual

Page: 34 / 44

To configure network access for Windows 98SE and Windows Me on the server side:
Note
: Internet Protocol (IP) routing software is required on Windows 98SE and Windows Me servers;
a trial version of WinRoute Lite may be downloaded from the Tiny Software
(
http://www.tinysoftware.com ). Asanté is not able to provide support for IP routing software. Please
contact your software vendor (e.g., Tiny Software) for assistance.
1. From the Windows Control Panel, double-click the
Network icon.
2. On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver
(scroll down if necessary).
3. Click Properties and select the IP Address tab.
4. Select Specify an IP address .
5. Enter an IP Address (suggested value: 192.168.123.1) and a Subnet Mask
(suggested value: 255.255.255.0).
6. Click OK buttons twice to close the dialog boxes.
7. Click YES to restart your computer.
If you are using WinRoute, you will need to configure the software:
8. In the Windows system tray, right-click the WinRoute icon and select
Administration.…
9. On the Settings tab, select 2nd network adapter .
10. From the Network adapter drop-down list choose any adapter other than the
Asanté FriendlyNET adapter and click the Settings button.
11. On the DHCP tab, in the Adapter drop-down list, select the Asanté FriendlyNET
FBT100 adapter (or equivalent).
12. Select Enable DHCP Server .
13. Fill in the client IP address range fields using these suggestions:
•
From: 210
•
To: 240
14. Click OK and then minimize (do not close) the WinRoute Administration
configuration panel.
Asanté FBT100 User’s Guide 11/12/02 Edition 34