Mounting of the sensor
The wall plate is screwed onto the wall
(A) Put the top tabs of the front part into the top
holes of the wall plate.
(B) Press the lower edge of the case onto
the wall plate to latch
The top part is pushed under the
Terminals and jumpers on aSENSE
VAV.
locking hooks of the wall plate
The darker positions are default settings.
and is secured with a screw.
Terminals and jumpers are located under the top part.
NOTE!
If for some reason the PCB must be removed it must be handed carefully and protected from
electrostatic discharge! Normally, removing the PCB is not required.
A
B
~
+
Screw head diameter:
max 7.5 mm
Screw head height:
max 2.5 mm
