2
Malfunctions and Causes
●Problem solving.
Problem
The unit does not
operate.
Make sure the power cord is
correctly plugged into the electrical
outlet.
Check the circuit breakers.
Check the circuit breakers.
Make sure the fuse is not blown.
Replug the power plug into the
electric outlet.
Check the fuse of the appliance
inlet.
P16
P5,P7
P8
P14
Check point
Procedure
The unit does not
vacuum, or air is
not completely
removed from the
bag.
Make sure the bag is not too large
for the volume of contents.
Make sure the bag is placed
correctly.
Check the bottom foam gasket for
cracks.
Cut or change the bag to the
appropriate size.
Place the bag properly.
Replace the PTFT strip.
Please contact the store where
you made the purchase.
Check the PTFT strip for wrinkles or
cracks.
Make sure the nozzle or the tube
for the liquid catch canister is
connected properly.
Make sure the nozzle or tube is
not clogged.
Make sure the lid of the liquid catch
canister is closed.
P11,P13
Reset the lid of the liquid catch
canister.
Clean the inside of the nozzle
or tube.
Reconnect every tube.
P16
P5
P8
P14
P14
P14
The unit cannot
seal the bag, or
the bag is not
sealed sufficiently.
Make sure the bag is appropriate.
Make sure the bag is placed correctly.
Make sure the foam gasket is not
deformed.
Use a bag of the proper
material or size.
Place the bag correctly.
Replace the PTFT strip.
Please contact the store where
you made the purchase.
Check the PTFT strip for wrinkles or
cracks.
Make sure the adjustment of the
sealing function is proper.
Make sure the adjustment of the
sealing function is proper.
Make sure the overheating
protective device is not activated.
*If activated, the red and green lights flash
alternately.
Check the heater for breaks.
P7
P7
Replace the heating wire.
Restart the unit.
Set the seal time property.
P5
The sealed part
melts.
Make sure the bag is appropriate.
Male sure there are no holes in the
PTFT strip.
Use a bag of the proper
material or size.
Set the seal time property.
Replace the PTFT strip.
15
Safety Precautions
Important Safeguards
▼
Items shown here are categorized as Danger, Warning, or Caution.
Even items categorized as Caution may lead to serious results depending on the circumstances.
Important information about safety is written in all cases and must be observed without fail.
Danger
This indicates that there is an imminent hazard and that death or serious injury
may result if this label is not heeded and the product is used improperly.
Warning
This indicates death or serious injury may result if this label is not heeded and
the product is used improperly.
Caution
This indicates that injury or property damage may result if this label is not
heeded and the product is used improperly.
Avoid contact with water , which can result in a short or electric
shock.
Do not use the appliance if tape is not placed on the seal strip.
This may cause fire, electric shock, or burns and injuries.
Close supervision is necessary when any appliance is used near
children. Children should not operate.
Only a certified repairman should perform any dismantling,
repairs or modifications.
Fire or abnormal operation may result in injury.
Always unplug the appliance from the outlet for repair.
Use the outlet only for this appliance (3.15 A or more).
Overloaded outlets may cause overheating or fire.
Wipe away any dirt on the plug.
Grime may cause fire.
Be sure to ground the grounding terminal properly
to prevent electric shock.
Use a designated part for the seal area.
Apply the PTFT strip after replacement.
Inappropriate replacement can cause overheating, fire or electric
shock.
Clean or replace the sealing strip after turning off the switch and
unplugging the unit.
Do not plug in or unplug electrical equipment with wet hands.
