PIPE SAW 200SP
2
● To prevent accidents such as fire, electrical shock and injury, always follow the
"SAFETY INSTRUCTIONS" described below.
● Before using the machine, read all "SAFETY INSTRUCTIONS" to use it correctly
according to the instructions.
● After reading the instructions, save this manual so that you can read it when
necessary.
SAFETY INSTRUCTIONS
◆ Operate the machine on the correct voltage.
Always use the machine at the rated voltage indicated in the machine plate or
instruction manual.
Otherwise, the machine will overheat, emit smoke or catch fire.
◆ Make sure that the switch is OFF before plugging the machine in.
Before plugging the machine in, always make sure that the switch is OFF to avoid
accident or injury. If the switch is ON, the machine will start suddenly, leading to
unexpected accident.
◆ Guard against electrical shock.
Do not touch the plug with wet hands.
Do not expose the machine to rain and water.
Always ground the machine to avoid electrical shock.(Except the double-insulated
machine)
◆ Avoid dangerous environment.
Do not expose the machine to rain or water and do not use it in damp or wet
locations. Humidity will deteriorate motor insulation or lead to electrical shock.
Do not use the machine in the presence of flammable liquids or gases such as
gasoline and thinner. Otherwise, ignition or explosion may take place.
◆ Use safety goggles.
Wear safety goggles while operating the machine. Also use a face or dust mask if
operation creates dust. Sawdust and dirt may enter your eyes and nose.
◆ Secure work piece.
Use clamps or a vise as described in the manual to hold a workpiece securely.
An insecure workpiece will lead to accident or injury.
◆ Use only the specified accessories and attachments.
Use only the accessories and attachments given in this manual and our catalogs.
A failure to do so will lead to accident or injury.
◆ Never touch the saw blade and moving parts until you have
confirmed a complete stop.
The saw blade and other parts coast for a while after the switch is turned off. Never
touch them while they are moving.
When it is required to touch the saw blade and moving parts for replacement, etc.,
switch off the machine and unplug it before starting the operation.
If the machine remains plugged in, it will start suddenly, leading to accident or injury.
SAFETY INSTRUCTIONS
WARNING