PIPE SAW 200SP
14
② Push the Main Body into Vise Pin. At this time, conform the Vise Pin into the
hole of Main Body.
③ Loosen the Chain Vise, conform the saw blade at the cutting position, and
then again fix it securely.
④ Pull the Trigger Switch to turn the machine on with the saw blade pressing
against the work piece. Lift the grip up and cut the work piece slowly.
For cutting speed, refer to the below chart.
⑤ For removing the main body from the Chain Vise, pull out the main body
pushing the end of the Vise Pin with thumb.
＊ Indicated cutting times are averages. It may take longer under the condition of
the saw blade and also the cutting material.
＊ Adjust the saw blade speed at cutting condition. If the waggle width of the
saw blade is wide or the saw blade chip, adjust the saw blade speed slower.
Cutting material
Size
Dial indication
Cutting time
Steel Pipe
2"
6
15sec
4"
1min
6"
2min
8"
4min
Stainless Pipe
2" (t=3)
1
2min
4" (t=3)
4min
6" (t=3)
9min
Grip
Work piece
Saw Blade
Pull the Trigger Switch to turn the machine on
with pressing the saw blade against the work piece.
Trigger Switch
Vise Pin
HOW TO OPERATE
THE MACHINE