5
Battery Replacement
Follow these steps to replace the batteries:
◆
Remove clip screw and mounting clip.
◆
Press snap tab down and remove battery cover.
◆
Install 2 AAA Alkaline batteries according to
polarity diagram.
◆
Check to see that timer display is on.
◆
To reinstall battery cover, insert bottom lugs
first then snap into place.
◆
Install mounting clip by tightening screw into
threaded insert.
◆
Timer is ready for use.
Button Functions
CLOCK (6)
— Displays time. Multiple presses
toggle between standard time (AM/PM), military
24-hour time and universal time (UTC or “Zulu”).
FUEL/CHRONO (8)
— Jumps to fuel timer from
any other mode. Subsequent presses toggle between
fuel and chrono (stopwatch) modes.
APPROACH (9)
— Jumps to approach timer from
any other mode.
NOTE (13)
— Press to set note data.
START/STOP (7)
— Starts a stopped timer, stops a
started timer. Also stops the audible and visible
alarm for the currently displayed timer.
DIAL (11)
push — Pushing the dial knob allows
the current timer, clock or note data to be set.
Flashing digits indicate the current digits being
modified. Subsequent presses step through the data
being set (i.e., from hours to minutes to seconds).
DIAL
rotate — Clockwise rotation increments and
counterclockwise rotation decrements the flashing
digits on the screen.
