5
–Never place the set in a confined space such as a
bookcase, or built-in cabinet unless proper
ventilation is provided.
Power-Cord Protection
–Route the power cord in
order not to be walked on or pinched by items
placed upon or against them, paying particular
attention to the plugs, receptacles, and the point
where the cord exits from the appliance.
–Do not place the set over a radiator or heat
register, or where it is exposed to direct sunlight.
In the normal temperature, if you pour a cold liquid
into a glass, water vapor in the air will condense
on the surface of the glass. This is moisture
condensation. The moisture condensation may
occur inside of VCPs, if used in this condition, it will
cause damage to the head and the tape.
In case of moving the VCP from a cold place to
heated place,
Or the temperature of surroundings goes up due to
room heating switched on.
Or moving the VCP suddenly from air conditioned
room to a place of high temperature of humidity in
summer.
may cause the dew indicator to light up. Do not
use in this condition.
When the moisture condensation occurs inside of
the VCP, NEVER insert the cassette into the
cassette compartment. Remove the cassette, if
loaded, by pressing the STOP/EJECT key. Only
operate the VCP after the moisture condensation
has completely dried out. Normally, it takes about 2
hours.
MOISTURE CONDENSATION
When does the
moisture condensation
occur inside of the
VCP?
