background image

NCS40T

4

WARNING: THE IN∙COMMAND CONTROL SYSTEM AND MOBILE APPLICATION OPERATE THROUGH THE WIRELESS 

TRANSMISSION OF SIGNALS USING BLUETOOTH LOW ENERGY AND/OR CELLULAR TRANSMISSIONS.  IN SOME 

ENVIRONMENTS, FREQUENCY INTERFERENCE, IMPROPER OPERATION, FAULTY INSTALLATION AND/OR YOUR MOBILE 

DEVICE AND SETTINGS MAY RESULT IN WEAKER SIGNALS OR INABILITY TO RECEIVE AND/OR TRANSMIT SIGNALS.
WARNING:  SOMEONE COULD MALICIOUSLY PAIR A MOBILE DEVICE WITH THE IN-COMMAND SYSTEM AND OPERATE THE 

TRAILER IF IN RANGE OF THE TRAILER.
WARNING: YOU ARE SOLELY RESPONSIBLE FOR THE OPERATION OF YOUR MOBILE DEVICES AND TO UPDATE THE MOBILE 

APPLICATION PERIODICALLY TO ENSURE THERE ARE NO COMPATIBILITY ISSUES.
WARNING: THE IN∙COMMAND CONTROL SYSTEM AND MOBILE APPLICATION ARE INTENDED FOR ADULT USE ONLY AND 

ARE NOT TO BE USED BY PERSONS UNDER AGE 18.  USE BY CHILDREN MAY CAUSE SERIOUS PERSONAL INJURY AND/OR 

PROPERTY DAMAGE.
WARNING: DO NOT OPERATE YOUR VEHICLE, TRAILER, OR INSTALL THE IN∙COMMAND SYSTEM OR USE THE MOBILE 

APPLICATION WHILE UNDER THE INFLUENCE OF ALCOHOL OR DRUGS.  DOING SO MAY RESULT IN SERIOUS PERSONAL 

INJURY AND/OR PROPERTY DAMAGE.
IMPORTANT: Signal range may vary due to environmental and other factors.  Connection issues can be caused by competing wireless 

signals and even other structures and electronics systems installed in your vehicle\.  Issues like this may result in frequent disconnects 

or slow connection speeds.  In addition, third parties could maliciously pair a mobile device with the iN-Command System and could 

operate the trailer if their mobile device is in range of the trailer.  Company does not and cannot control the flow of data or transmissions 

over the Internet or over cellular networks and/or the strength of WiFi or Bluetooth connections or the integrity of the Internet (the global 

system of interconnected computer networks), signal connections or signal strength.  Company does not and cannot control the actions 

of third parties.  Therefore, Company disclaims all liability for loss of data, corruption of data, or inoperability of the Device and/or the 

Mobile Application, as a result of disruptions, slowdowns, breakdowns, or other technical issues affecting the Internet, WiFi or Bluetooth 

transmissions or wireless services provided by third party wireless carriers.  Company also disclaims all liability in connection with the 

actions of third parties including any malicious pairing, unauthorized use/access and/or any security breach.

Summary of Contents for 35771





























Reviews: