EN
English
Never leave the engine running at the maximum engine speed or running idle for a long time while the clutches of the cutting disk drive and
wheel drive are turned off. The machine drive parts could be damaged (V-belt, belt pulley, clutch pulley, etc.)!
Remove any solid parts form the stand before cutting (such as stones, wires, loose construction leftovers, etc.), as these could be thrown away
or damage the machine. If these parts cannot be removed, avoid these places.
The machine is equipped with a rotating implement. Maximum circumferential speed is
60,9 m.s
-1
. It is therefore important to keep other
persons at a safe distance while the machine is operating (there is a possibility of the cut stand or solid objects chipping off)!
When the machine is being operated, all other persons (
especially children
) and animals must stay out of the machine's workspace. The
machine attendant can only continue working after taking these into a safe
distance.
Keep a safe distance form the machine given by its handlebars.
When operating the machine, use work aids approved by
EN 166
or
EN 1731
(tight clothes, firm shoes, work gloves and protective glasses). a)
Protect your ears with appropriate safety devices according to
EN 352-1
(a) shell-shaped ear protectors) or
EN 352-2
(a) plug ear protectors).
Ask your dealer for these safety devices.
Safe limbing ability of the machine is 10º. Maximum engine tilt while working is 20º for long and 30º for short periods
Do not use the machine on wet grass. Always work on safe terrain. Walk - never run - when working. Be careful, especially when changing
directions on slopes. Do not cut stands on steep slopes. If you fall, let the machine go, do not hold it.
It is forbidden to remove any protective devices and covers from the machine.
Any machine repairs, adjustments, greasing and cleaning is to be carried out when the machine is turned off and disconnected the spark
disconected.
1.2.2 Noise and vibration values
➢
Declared emission level of the acoustic pressure
A
at attendance point
L
pAd
= (84,0+2,0) dB
➢
Guaranteed sound power level A
L
WA,G
= 98 dB
➢
Declared aggregate acceleration value of the vibrations transferred onto the hand-arm of the machine attendant
(6,3+2,5)
m.s
-2
1.2.3 Safety pictograms
The user is required to keep the machine pictograms readable, and have them exchanged in case they are damaged.
Location:
Number: Description:
Combined sticker, which is
stuck to the rear plastic
cover. (
Pict. 18
(1)
Study the user manual before operating the machine.
(2)
Spark plug cable must be disconnected during machine maintenance.
(3)
Do not reach with your arm nor step with your leg into the cutting blade work space – risk of cutting.
(4)
Risk of injury from chippings, cut-offs, flying objects, etc. Other persons and animals - keep safe distance
from the machine.
(5)
Adhere to the machine’s maximum safety climbing ability when working.
(6)
Guaranteed sound power level of the machine.
Separate sticker on the
front plastic cover. (
Pict.
-
Tool turning direction arrow – to the right (clockwise)
Sticker (
Pict. 17
) on the
control lever(1) on the
right handle (
Pict. 5
).
-
Turning on the cutting disc drive. „
0
“ = the cutting disk is not rotating , „
1
“ = unlock the safety switch ,
„
2
“
= the cutting disc is rotating
Sticker (
Pict. 16
) on the
control lever (2) on the left
handle (
Pict. 5
).
-
Turning on the machine wheel drive. „
0
“ = the machine is standing still, „
1
“ = the machine is moving
Sticker
(Pict. 20)
placed on
the cutting disk cover on
the left side in the direction
of movement.
-
Area forbidden
for other persons and animals. Minimum safe distance from the machine.
Tab. 2: Safety pictograms
4
EN 12733
norm governs the specifications of the outer safety area A around the work area B. It is also necessary to use appropriate ban signs to prevent entrance into this
area. The distance between individual of A and B areas must not be smaller than
50 m
. As soon as a person or an animal enters the area, the machine attendant must
immediately release the cutting disk drive lever and postpone working until the area is clear again.
5
Short period = up to 1 minute.
6
According to
EN 12733,
Appendix B
and
EN ISO 11 201
7
According to
2000/14/EC
instructions, Appendix No.3, part B, point 33 and
ISO 3744
8
According to
EN 12733
, Appendix C and
EN ISO 20643
6