16
Control elements
Handlebar with controls (1)
A
B
C
D
F
H
E
G
Fig. 4:
Drive lever (A)
AS 62 4T B&S
With the drive lever, you switch the drive on
and off.
I
0
Drive on (I):
Press the lever towards
the handlebar and con-
tinue to hold.
Drive off (0):
Release the lever.
Drive lever (A) and brake (B)
AS 63 2T ES, AS 63 4T B&S, AS 63 4T Honda
With the drive lever, you switch the drive and
the parking brake on and off.
Drive off/ parking brake
on (0):
Release the lever (A).
Drive on/ parking brake
off (I):
Press the lever (A) towards
the handlebar and con-
tinue to hold. A
Release brake:
Press brake lever (B) to-
wards the handlebar. B
Vario lever (C)
With the vario lever, you can continuously ad-
just the speed of the device while the engine
is running.
MIN: slow
MAX: fast
Blade clutch lever (D)
The engine clutch lever is a guard device.
When you release the lever, the blade comes
to a standstill within 7 seconds.
Disengaging blade (0):
Release the blade clutch lever
and set the accelerator lever to
MIN.
Engaging blade (I):
Lift the blade clutch lever, en-
gage latch knob (E) and press
blade clutch lever towards the
handlebar.
accelerator lever with engine stop (4)
AS 62 4T B&S, AS 63 4T B&S, AS 63 4T
Honda
With the accelerator lever, you can change the
engine speed and thus control the engine out-
put.
For devices with choke, set the accelerator
lever to “Choke” when you start the cold en-
gine. At the lowest position “0”, the ignition is
switched off and the engine is turned off.
1
2
3
4
1:
Choke = Choke closed
(only device with choke)
2
Full throttle
3
Idle speed
4
Engine off
