Arzum VACUUMIX AR 1061, Instruction Manual, Page: 21 / 68

21 ARZUM
EN
appliance due to a sudden steaming.
• Make sure the blade unit is securely fastened and the lid is properly
assembled to the blender jar before you use the appliance
• Never assemble or disassemble the blender jar to the motor base while
the appliance is on. Switch off the appliance and unplug it first.
• Do not operate the blender without any ingredient. Otherwise, it may
lead to overheating.
• In order to avoid a hazard due to inadvertent resetting of the
thermalcut-out, this appliance must not be powered through an
externalswitching device such as a timer or connected to a circuit that
isregularly switched on and off by the utility.
• Do not exceed the maximum volume indication on the blender jar.
• Do not exceed the maximum quantities and processing times
indicatedin the relevant table.
• If food sticks to the wall of the blender jar, switch off the appliance
andunplug it. Then use a spatula (not supplied with the product) to
remove the food from the wall of the blender.
WARNING : For the purposes of recharging the battery, only use the
detachable supply unit provided with this appliance.
The battery must be removed from the appliance before it is
scrapped. The appliance must be disconnected from the supply mains
whenremoving the battery.
The battery is to be disposed of safely.
This appliance contains batteries that are only replaceable by
skilledpersons.
BEFORE FIRST USE
• Read the instruction manual carefully.
• Before use the appliance thoroughly wash the parts that come into
contact with food, into foam water and rinse and dry.
• Blending is a very fast process. To succeeding blending process, motor
runs the blades at high speed. Make sure that the place of appliance is
level, clean and dry surface when the blender start operating.
• If you want to operate the appliance continuously, let the blender cool
down to room temperature before you start to use again.