• Your appliance should not be connected to main water pressure of your home; it
is only connected in the bathroom or anywhere that proper for the authorized service.
• At the first time operating your appliance, do not switch on the electrical circuit
before having the tank (the water reservoir of the appliance) filled with water.
• Do not install your appliance at places where water is likely to freeze. If water
frozen do not operate the appliance.
• Your electrical instant water heater should be connected to an automatic
fuse of at 40 Amperes.
•
There will be differences in the input water temperatures according to the
seasonal variations. You may obtain the water you need by arranging the water
temperature selection switch and water input quantity to suit your requirements.
• While your electrical instant water heater is in use do not operate other
devices with over 1000 W power (oven, iron, washing machine, dishwasher, etc.).
• In the cases of low pressure or water supply failure, the appliance’s power
supply is cut. When enough pressure is reached power supply is resumed.
• You are recommended to have a pressure regulator installed on the cold-
water input side of youe electrical instant water heater, when using at such
places with a water pressure of 6 bars of more.
The hoses and pipes that are to be directly connected with the installation
need to sustain a working pressure of 6 bars.
In order to deal all ports of trouble and breakdown and to provide spare parts
definitely apply to our
Arzum
Authorized Service
.
DEFINITIONS AND SPECIFICATIONS
7 SECURITY SYSTEMS
1- The resistance of your appliance is a covered tube resistance and so the
resistance wire never touches with water. Thanks to this feature, the current
electricity does not contact with the water and that prevents the electric shocks.
2- When the water pressure is too low or there is no water, diaphragm switch
cut off the water heater’s power supply, if even your appliance is powered on.
3- When water is over heated, the thermostat which in within the heating
reservoir switches off to ensure absolute safety. If the water temperature comes
to normal degrees, it switches again.
4- When any blockage at the water discharge of the appliance becomes, the
return system switches off your appliance, in order to prevent the sudden
increases of the water temperature.
5- The security valve lying on the heating reservoir empties the over pressure
and thus prevents any damages of the user and the appliance.
6- Within the heating reservoir, where tube resistances were inserted, durably
water will become held and thus plastic accessories of the equipment are
protected from damaging of losses water until they becomes cool.
7- Against the fact that the user is not to leave the appliance open was powered
on, there is an indicator light in front of it.
STEP INDICATOR SWITCH
(WATER TEMPERATURE SELECTION
SWITCH)
This switch allows you to turn on an off your electrical
instant water heater and to adjust your hot water level.
The appliance has three steps including 3200 W, 4400 W,
and 7600 W, whichever one you may desire to choose
according to the water temperature.
0
No heating
1
3200 W
2
4400 W
3
7600 W
INDICATOR LIGHTS
There are three indicator lights on your appliance,
which indicate at which step in operates and whether
there is any tension on it.
N-AUTOMATIC POWER SWITCH
N-Automatic power switch functions as the key, when set to the position “off”,
this power switch will automatically cut-off the connection of the instant water
heater with power supply. This power switch is mounted to the appliance not
to the fuse panel.
DIAPHRAGM SWITCH
When the water pressure is low, it switches on automatically to cut off the
water heater’s power supply and ensures the resumption on the operation
of water heater when the normal water pressure returns.
SAFETY THERMOSTAT
When water is over – heated , the heater’s resistance switches off to ensure
absolute safety.
RESISTANCE TO WATER PRESSURE
Taking into account the main water pressure of the city, your electrical instant
water heater has been already subjected to a test under the pressure of 11 bars.
WATER HEATER’S MONTAGE ONTO
THE WALL
• Ensure that the wall to which you are to mount the appliance be of an even surface.
• Mark the places of nipples by using the montage pattern given with the appliance.
• Drill 4 places in which nipple can enter completely (8 mm).
• Insert the nipple into the hole and turn the screw to a distance of 3 mm to
the nipple.
• Montage the heater’s body by assembling screw through hanger seats.
14
15
