Arzum OKKA OK001-WFU, Instruction Manual, Page: 12 / 32

12 ARZUM OKKA
1. Clean the outer body with a damp, soft and
lintless cloth. Do not use abrasive cleaning
substances in order to prevent damage to
outer body.
2. All removable parts may be cleaned by
hand with hot, soapy water. The parts are not
suitable for washing machine.
3. Do not use chemical cleaning substances
for hose cleaning.
The boiling point of water depends on the
altitude above sea level. The appliance deter-
mines the boiling point automatically.
When the appliance is used for the first time,
the boiling point is set immediately. The wa-
ter chamber should be filled before turning
the appliance on. The boiling point must be
set again if the height above sea level has
changed:
1.Fill the water chamber and make sure the
waste water tray is empty.
2. Remove the brewing head by turning it an-
ticlockwise.
3.Press the and buttons at the same time
until the LEDs start to flash.
4.Reattach the brewing head by turning it
clockwise and make sure it is securely locked
into position.
5.After 3 seconds, an acoustic signal is emit-
ted and the boiling point detection process
starts.
Outer Body Cleaning
Boiling point
Reset the boiling point