Arzum MAGICLEAN FORCE AR 4200, Manual

Page: 18 / 28

18 ARZUM
Grip the handle of your vacuum cleaner to install the
motorized turbo head of your vacuum cleaner.
Place the head flat on the ground and push the tube
aligning on it. If you want to remove the head, you can
remove it by pressing the release button.
Charging Stand Installation:
You can mount the charging stand on the wall using
the screw.
You can place the included accessories in
the slots on the charging stand.
Place your appliance on the charging stand
and press gently. Before deciding on the
location of the stand, we
recommend that you adjust the adapter cable to the
outlet.
To disconnect your appliance from the charging
stand, press the button on the stand and pull the
appliance towards you.
CHARGING OF THE BATTERY
• Before charging the charged stick vacuum cleaner, make sure that
the stick vacuum cleaner is properly installed. After placing the vacuum
cleaner on the charging stand, plug the charging stand into the wall
socket.
• When charging the product for the first time, please make sure the
battery is fully charged. For longer battery life, it is recommended to fully
discharge the battery before recharging.
Note: For the first three uses, the product must be charged continu-
ously for 12 hours after the battery is completely discharged.
• When the charge is below the level required to start the product, the
light on the display will flash and your appliance will turn off to protect
the motor. You can continue to use the battery when it is
sufficiently charged.
• When charging starts, the charging light will start flashing.
• Charging is complete when the charging light is steady.
• Your appliance will automatically stop charging after the