20
ARZUM
PROBLEM
•
Is the power cord
connected?
•
Is the Juicer assembled
correctly?
•
Has the power gone off?
•
Have you operated the
Juicer for over
20 minutes?
•
Did you assemble the
rubber pad correctly?
•
Did you use fresh
ingredients?
•
Did you put too many
ingredients or anything
else into the machine?
•
Did you force food into
the juicer?
•
Did you put the
ingredients with hard
seeds?
•
Check weather the power cord
is plugged into a 220-240V
50/60Hz wall out let.
•
Assemble the product as
described in this user’s manual.
•
Assemble the product as
described in this user’s manual.
•
Turn off the product. Wait for a
while and reactivate the product.
If you want to use the product
continuously,pause the operation
for 1 hour.
•
Assemble the rubber pad
correctly as described in this
user’s manual.
•
Overripe fruits or vegetable
may clog in the motor. lf you
want to use the overripe
ingredients, use them after
soaking in mineral water for
10 minutes or more.
•
Turn switch to “REV” for
several second, stop, then
to “On”.
•
Check if there is many
ingredients put into the
machine.
•
Turn off the machine,and
switch to “REV” for several
seconds,and then turn to
“On” and try it again.
The Product is not
working
The Juice does not
discharge sufficiently
or there is juice
discharging from pulp
ejecto
The product stops
while in operation
POSSIBLE SOLUTIONS
CHECK
WHAT TO DO IF YOUR APPLIANCE DOES
NOT WORK?
