16
ARZUM
• Definitely place the juice and pulp tanks aligned to the drainage
channels.
• Turn the control knob to setting “ON” switch on your appliance.
• Insert the fruits and vegetables into the food feeding channel and push
them slightly by using the pusher part.
• Pls don't put so many ingredient in the hopper at the same time.
• If the juicer is being fed continualy, it may cause the ingredients clog
the drum and no juice can come out (please remove some ingredients
when this happen).
NOTE: Do not exert too much pressure on the pusher, as this could
affect the quality of the end result and it could even cause the filter
to come to a halt. In such situations you can hold the device for few
seconds in the "REV" position and put out the material which was
blocked in the tank. Later on you can put the button on the "ON" position
and continue with the process.
CAUTION: Never insert your fingers or an object into the feeding tube.
Only use the pusher.
• When you operation, it is better to close the juice
cover, when it full, you open.
• Turn the operation button of the device to the
“Off” position to shut it down and wait until the
pressing spin has topped completely.
TIPS
• Clean and peel the fruits and vegetables properly.
• Use fresh fruit and vegetables, as they contain more juice. Pineapples,
beetroots, celery stalks, apples, cucumbers, carrots, spinach, melons,
tomatoes, pomegranates, oranges and grapes are particularly suitable for
processing in the juice extractor.
