8
ARZUM
9
ARZUM
VERTICAL STEAM
• Set the temperature control dial to the
position max, and the variable steam button
to the position max. Stand against the cloths
and curtains that you would iron in the vertical
position. Depress the shot of steam button.
WARNING: NEVER ATTEMPT TO IRON ANY
CLOTHS WHEN WORN BY YOU OR OTHERS.
AFTER USE
• Set the variable steam button to the position “0”.
• Remove the mains plug from the wall socket
and wait for the soleplate
to cool down completely.
• Hold the iron downward,
and pour out the water
contained in the tank by
shaking it.
• Take care that there is no water in the water
tank before storing your iron and that the iron
stands upright, but not in the horizontal position
on its soleplate.
CLEANING AND CARE
• Ensure that your iron is disconnected from the power supply and allow
the iron to cool down thoroughly.
• There may be some fabric deposits and other residues on the
soleplate. Those sticky residues can be removed with a damp thick cloth
soaked in a vinegar/water solution. Then wipe off the soleplate with a dry
cloth.
• Do not use abrasive and scratching objects on the soleplate when
cleaning. Avoid hard contact with metal objects.
• Wipe up the outer surface of your iron with a damp cloth, and wipe
dry with a dry one. Do not use abrasives or harsh cleaners as they may
damage the surface of the iron.
•
Never immerse the iron in water or any other liquids.
•
Do not put vinegar or chemical calcification removers into the water
tank.
SPRAYING
• At any temperature by pressing on
the spray button a couple of times, the
laundry to be ironed can be damped
down.
STEAM IRONING
• Steam ironing with your iron is only
possible in the higher temperatures as indicated in the temperature
switch and in the table.
• Ensure that there is
enough water in the water
tank.
• Stand the iron on its
heel and plug into the
mains supply while the
thermostat adjustment
button is min position and
switch on.
• Set the temperature switch to the correct position for steam flows.
• As soon as the temperature display light disappears you can start
ironing.
SHOT OF STEAM
• When and if required, in order to
supply more steam you can iron quite
easily your hard iron able and too
wrinkly cloths through shot of steam
during both steam and dry ironing.
• Lift the iron slightly above the
surface of the fabric; depress the shot
of steam button for 3 to 5 seconds,
and then release. Steam flow will begin after releasing the button.
EN
