Arzum AR 6019, Instruction Manual

Page: 26 / 32

26 ARZUM
Problem Possible causes Solution
The iron begins to
smoke when
switched
on.
1. During first use:
certain components
on the appliance
have been lightly
greased at the
factory and may
produce
a small amount of
smoke when initially
heated.
2. During subsequent
use: the soleplate
may be soiled.
1. This is completely
normal and will
stop after a short while.
2. Clean the soleplate
according to the
cleaning instructions in
this manual.
Water flows
through the
holes on the
soleplate.
The water is con-
densing inside the
tubes because
steam is being used
for the first time or
has not been used
for a long time.
Point the iron away from
the ironing
area and press the steam
release
button until steam is
produced.
Dirt comes out
through
the soleplate.
1. There is a build up
of limescale or
minerals in the boiler
and iron.
2. Chemical products
or additives have
been used.
1.Carry out a cleaning
cycle (see the
“Descaling process”
section).
2. Never add products to
the water
(see the “Filling the water
tank”
section).
Clean the soleplate with a
damp cloth.
TROUBLE SHOOTING