©2005 ARX Systems Pty. Ltd. ACN 006 471 825. All rights reserved. ARX Systems® is a Registered Trade Mark
ARX Systems Pty Ltd; PO Box 15, Moorabbin, Victoria 3189, Australia
Phone: 03 9555 7859 Fax: 03 9555 6747 International Fax +61 3 9555 6747
Email: [email protected] Internet: www.arx.com.au
Our policy is one of continuous
improvement, and therefore de-
signs may change without notice.
However, unless otherwise stat-
ed, specifications will always equal
or exceed those previously given.
8 CHANNEL LINE TRANSFORMER UNIT
8 CHANNEL LINE TRANSFORMER UNIT
8 CHANNEL LINE TRANSFORMER UNIT
8 CHANNEL LINE TRANSFORMER UNIT
8 CHANNEL LINE TRANSFORMER UNIT
ZAT 8
The ARX ZAT 8 provides a quick, simple way to add
100V line transformer capabilito the ZA800 multi chan-
nel amplifier.
The ZAT 8 uses fully isolated Neutrik Speakon connec-
tors throughout, in keeping with all current Worldwide
approval requirements for amplifier output connections.
On the right hand side of the rear panel are the Inputs
High Quality low profile
High Quality low profile
High Quality low profile
High Quality low profile
High Quality low profile
Toroidal transformer
Toroidal transformer
Toroidal transformer
Toroidal transformer
Toroidal transformer
Frequency Response
Frequency Response
Frequency Response
Frequency Response
Frequency Response
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
4 BiFilar
4 BiFilar
4 BiFilar
4 BiFilar
4 BiFilar
8 channel line transformer
add-on for the ZA 800
series of multi channel
amplifiers
Converts a standard
output ZA 800 to a 100V /
70V line model
Speakon Inputs and
Outputs
All steel chassis
Toroidal transformers for
low noise, high output
operation
Only 1 RU in height
Available in 100V and 70V
models
from the matching connectors on the rear of the ampli-
fier.
In the centre is a list of the pin connections for each of the
connectors.
On the left hand side rear are the corresponding Outputs
that connect to the speakers.
6 CHANNEL LINE TRANSFORMER UNIT
6 CHANNEL LINE TRANSFORMER UNIT
6 CHANNEL LINE TRANSFORMER UNIT
6 CHANNEL LINE TRANSFORMER UNIT
6 CHANNEL LINE TRANSFORMER UNIT
ZAT 6
The ARX ZAT 6 provides a quick, simple way to add
100V line transformer capabilito the ZA600 multi chan-
nel amplifier.
The ZAT 6 uses fully isolated Neutrik Speakon connec-
tors throughout, in keeping with all current Worldwide
approval requirements for amplifier output connections.
On the right hand side of the rear panel are the Inputs
High Quality low profile
High Quality low profile
High Quality low profile
High Quality low profile
High Quality low profile
Toroidal transformer
Toroidal transformer
Toroidal transformer
Toroidal transformer
Toroidal transformer
Frequency Response
Frequency Response
Frequency Response
Frequency Response
Frequency Response
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
40 Hz to 50 KHz +/- 0.5 dB
4 BiFilar
4 BiFilar
4 BiFilar
4 BiFilar
4 BiFilar
6 channel line transformer
add-on for the ZA 600
series of multi channel
amplifiers
Converts a standard
output ZA 800 to a 100V /
70V line model
Speakon Inputs and
Outputs
All steel chassis
Toroidal transformers for
low noise, high output
operation
Only 1 RU in height
Available in 100V and 70V
models
from the matching connectors on the rear of the ampli-
fier.
In the centre is a list of the pin connections for each of the
connectors.
On the left hand side rear are the corresponding Outputs
that connect to the speakers.