24
| Installation
Aruba S1500 Series Mobility Access Switch
| Installation Guide
Wall Mount Installation
For the S1500-12P model, the rack mount brackets can also be used for wall mounting.
For the S1500-24P or S1500-48P model
,
an optional accessory kit (purchased separately) is available that
allows mounting the S1500 Mobility Access Switch on a wall. For more information about the S1500
Mobility Access Switch Wall Mounting Kit, contact your Aruba sales representative.
Required Tools and Equipment
The following tools and equipment are required for installing an S1500 Mobility Access Switch on a wall:
Wall Mount Brackets (2x)
Screws for wall mount bracket (x8):
S1500-12P— M3 x 6.5 mm Phillips Flat Head Screws
S1500-24P or S1500-48P— M4 x 8 mm Phillips Flat Head Screws
Wall Anchors: Optional accessory (not included in the kit)
Wall Mounting Screws: The type of screw depends on the installation surface (not included in the kit)
Suitable Screwdrivers for all screw types (not included in the kit)
Installation Steps
To install an S1500 Mobility Access Switch on a wall:
1. Fasten the wall mount brackets over the mounting holes on the sides of the S1500-12P Mobility Access
Switch using the eight screws for wall mount bracket (four per bracket) and a suitable screwdriver (see
Figure 19
for the S1500-12P model and
Figure 20
for the S1500-24P or S1500-48P model).
Figure 19
Attaching the Wall Mount Brackets (S1500-12P)
Ensure that the Ethernet ports are facing down when installing the S1500 Mobility Access Switch on a wall.
